WANG Hai-min, MA Jian-min, ZHANG Wen, WANG Qun-li. STUDY ON FINITE DEFORMATION OF PROTEIN BUBBLE[J]. Engineering Mechanics, 2008, 25(3): 216-221.
Citation: WANG Hai-min, MA Jian-min, ZHANG Wen, WANG Qun-li. STUDY ON FINITE DEFORMATION OF PROTEIN BUBBLE[J]. Engineering Mechanics, 2008, 25(3): 216-221.

STUDY ON FINITE DEFORMATION OF PROTEIN BUBBLE

More Information
  • Received Date: December 31, 1899
  • Revised Date: December 31, 1899
  • According to the strain energy density function for finite deformation of viscoelastic material, to the relaxation function of Maxwell mode and to the deformation gradient tensor of bubble, a stress equation for finite deformation of protein bubble is derived. By using above equation and equilibrium equation of bubble, the equation describing the relation between relative deformation rate of inner radius and time is developed for the finite deformation yielded by the dynamic pressure acted on the bubble. Based on this equation, the nonlinear properties of the finite deformation, the effect of the pressure difference, the thickness and the viscosity of the film on the radial deformation of protein bubble are analyzed by numerical simulation method. The results show that, under the action of different load, the radial deformation of protein bubble is extremely nonlinear, the balance size of bubble and the time needed to reach balance state are different. Increasing the thickness and viscosity of protein film can prolong the time needed to reach balance state, and enhance the load-bearing capacity of protein bubble obviously.
  • Related Articles

    [1]GAO Xiang, YANG Gen, ZHANG Qing-he, KOU Xue-chao. DIFFERENTIAL EQUATION METHOD FOR SEMI-ANALYTIAL SOLUTION OF STRESS IN THICK-WALLED CYLINDERS CONSIDERING STRESS-DEPENDENT ELASTIC MODULI[J]. Engineering Mechanics. DOI: 10.6052/j.issn.1000-4750.2024.06.0443
    [2]WANG Yi-ping, XING Qin-yan. A NEW APPROACH TO STRESS FUNCTION METHOD FOR ELASTIC PLANE PROBLEMS IN POLAR COORDINATES[J]. Engineering Mechanics. DOI: 10.6052/j.issn.1000-4750.2024.05.0375
    [3]LI Ding-he, QING Guang-hui, XU Jian-xin. MESHLESS METHOD OF RADIAL POINT INTERPOLATION FUNCTIONS FOR ELASTICITY HAMILTON CANONICAL EQUATION[J]. Engineering Mechanics, 2011, 28(10): 46-051,.
    [4]GU Xiang, WU Zhi-xue. NEW EMPIRICAL STRESS-INTENSITY-FACTOR EQUATIONS FOR SURFACE CRACKS[J]. Engineering Mechanics, 2008, 25(7): 35-039.
    [5]YANG Hai-tian, YAN Jun, LI Xing-si. COMBINED IDENTIFICATION OF CONSTITUTIVE PARAMETERS OF VISCOELASTICITY AND TEMPERATURE FIELD VIA AGGREGATE FUNCTION APPROACH[J]. Engineering Mechanics, 2003, 20(2): 100-106.
    [6]TONG Xin. AN ACCURATE MODAL SUPERPOSITION METHOD FOR CALCULATING FREQUENCY RESPONSE FUNCTION OF VISCOELASTICALLY DAMPED STRUCTURES[J]. Engineering Mechanics, 2000, 17(5): 74-78,1.
    [7]WANG Chun-guang, LI Shao-fu, SHI Yong-Jiu. RESEARCH ON APPLICABILITY OF STRESSCONCENTRATION FACTOR PARAMETER EQUATIONS OFWELDED STEEL TUBULAR JOINTS[J]. Engineering Mechanics, 1999, 16(6): 44-53.
    [8]Shen Jiayin, Zhang yang. INTEGRATION EQUATIONS IN CORRESPONDENCE TO WEIGHTED FUNCTIONS AND THEIR SOLUTIONS[J]. Engineering Mechanics, 1988, 5(3): 128-134.
    [9]Zhang Zhengguo. Weight Function and Stress Intensity Factors of an Elliptical Crack[J]. Engineering Mechanics, 1987, 4(1): 80-86.
    [10]Huang Maoguang, Lei Xiaoran. A Boundary Integral Method of Elastic Torsion of a Shaft of Rotational Symmetry by Stress Function[J]. Engineering Mechanics, 1984, 1(1): 12-21.

Catalog

    Article Metrics

    Article views (1172) PDF downloads (327) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return